Service Manual Utility Truck 1954-1960
I found a Service manual for Utility Truck in pdf format on the net. I though that I should share it with you.
Here is the PDF link. It’s over 35Meg. It takes long time before to open.
Enjoy it!
I found a Service manual for Utility Truck in pdf format on the net. I though that I should share it with you.
Here is the PDF link. It’s over 35Meg. It takes long time before to open.
Enjoy it!
********Updated January 26********
Thank you John for sharing a picture of your hubcaps with us:
*************************************
Here is what I found about a J hubcaps that we spoke earlier on www.ewillys.com.
It’s not a scan but a picture that i found on Facebook. Look like it was made by Cutlass late 1960.
Here is some sheet about Full and half Cab from Meyer. There is also some snowplow information. The most interesting stuff is the installation instructions. I hope you will enjoy it!
Installation instructions for Meyer Full Cabs;
Installation instructions for Meyer Half Cabs;
Meyer Parts List:
Price List:
Enjoy it!
Here is a nice Warn Overdrive booklet.
Two model was available; one with 26 tooth and the other one’s with 29 tooth. Everything from CJ-3A and earlier should use the 26 tooth. From the CJ5, it should be 29 tooth. So if you own a CJ-3B or a 475 (Wagon and pickup) then you must need to check what you have.
Enjoy it!
After almost three-year on the waiting list the patient is now in the surgery room. I’m excited!
The patient will get a heart transplantation and a face-lift. It will get also other minor operation. Hopefully, it will survive. I don’t know how much time the patient will be at the hospital.
Be quiet, I will take care of him.

Wish us good luck!
I will let you know of the progress.
I’m looking how to wire my new AMC radio for my DJ-6 project.
Here is pictures of it with what I’m thinking how it should connect:
I’m sure that the two connectors with white/black/green wires are used for the front/rear speakers. The connectors with the brown/orange/black wires is also easy since it’s written on the nameplate. I would like to be sure for the black connector on the left corner, is it for grounding to the chassis?
I’m wondering if the antenna is OK or not. Should I consider that the radio and the CB are using the same antenna?
Thank
First let’s start with the pics before the dismantlement…
Now here is more pics taken during the dismantlement of the Diesel CJ-5 1967 parts jeep:
So now the engine and tranny are resting in the garage.
Here is a PDF file about the Parts Book for Perkins Diesel Engine 4.192.
This parts Book has been published in 1963 for the special benefit of operator to servicing of parts for Perkins 4.192 Vehicle Diesel Engines commencing Engine Number 2500251.
Parts_Book_Perkins_4_192_Dec_1963
Enjoy it!
Here is a PDF file about the Workshop Manual for Perkins Diesel Engine model 4.192 and 4.203. It was printed in 1961.
We can learned into this manual that the engine serial number consists of seven digits. In a case of a Jeep motors (4.192), it commences with the figures 25XXXXX.
The serial number of my engine is 2509325.
I found interesting the way of joining the binder and sheet together. They used two screws!
WorkshopManualPerkinsDieselEngine_Four_192_203_1961
Here is the specifications sheet for the Perkins Diesel Engine Four 192 (4.192)
This sheet is for the industrial power units but the same engine was used in the Jeep CJ-5 CJ-6 and Massey-Ferguson Tractor MF65. The only difference is the HP is rated at 60 HP for 2200 RPM I think.
The engine for the Jeep has some own parts like the mounting bracket.
Enjoy it!
Here is a PDF file I found on the web about how to maintain a Perkins Diesel engines for model 3.144, 3.152, 4.192, 4.203, 6 PF288 and 6 PF305. It’s for three, four and six cylinders engines.
I’m looking to get the English version of this manual.
Livret_entretien_Perkins_3_144_3_152_4_192_4_203_6PF288_6PF305
Enjoy it!
Here is a direct download of the pdf file TM9-8031-2_power_train:
(Please note that this file is over 30Mg so it take time to open)
TM 9-8031-2
POWER TRAIN
BODY AND FRAME
FOR
3/4-TON 4X4 CARGO TRUCK M37;
COMMAND TRUCK M42;
AMBULANCE TRUCK M43;
AND TELEPHONE MAINTENANCE
TRUCK V41
Here is a PDF file that I made from a Parts and Accessories Bulletin manual. It is quite big. Around 19 Mg. My website is not very fast (low fee package…)Be patient. I do think it cover almost all 1960’s years. It has 157 pages. Those bulletins covers CJ-3B, CJ-5, CJ-6, J-series, DJ-3A, FJ-3, 6-226, FC-150. FC-170 and Wagoneers.
I hope you will enjoy it as much as me.
You can open it from here;
Parts_and_Accessories_Bulletin_manual_compressed
Thank
Here is a Sales Flyer Jeep CJ-3B 1960.
Yep! The 3B was still on the line even if the CJ-5 was available at that time. They was usually named the High Hoods. It’s basically a CJ-3A with the new F-Head hurricane engine in it. They had to raise the hood and front grill by 4 inch to fit the new engine in it. It’s a “You like or Don’t like”.